Front & Rear Springs (10" x 2.5) Any Rate
$48.00/ea

Front Bilstein Inserts
$129.00/ea

Modify Customer Front Strut
includes removal of stock spring seat & brake tab/check for straightness/ install new spring seat/ shorten strut & install Bilstein adapter/ bead blast & paint
$65.00/ea

Bilstein Rear Shock
$114.00/ea

Aluminum Threaded Sleeve & Nut
$44.50/ea (4  Required)

Solid Rear Shock Upper Plates
$25.00/ea

Spherical Bearing Rear Lower Control Arms
Holds Toe Adjustment Better.
$185.00/ea (w/exchange)

Adjustable Front Sway Bar Kit
1 1/4" Hold Speedway Bar w/ Removable Aluminum Arms
$275.00

Universal Camber Plates
$100.00

 

AXLE:

2nd Gen Rebuilt Rear Axle
$82.50/ea (exchange)
$35.00 Core Charge

Fuel Pressure Regulator w/ Fitting & Gauge
(For  2nd Gen)
$290.50

FUEL INJECTORS:

Our injectors are flowed and cleaned. 

86-91 RX7 Injectors w/ exchange  $45.00/ea

ENGINE:

Engine Rebuild:

13B Engine Rebuild Labor
$650.00

Balance Eccentric Assembly
$375.00

Installation of Engine
(includes 2 Hrs of dyno time)
$590.00/plus parts

COOLING SYSTEM:

"New" Large Oil Cooler
$500.00
6 1/2" x 23" x3"
Double pass cross flow with -12AN male fittings.
We will tig weld brackets to your specs.

Filler $52.00**
 Moroso Fillers  1 1/2 size.

20lb Radiator Cap
$10.95

1 1/2 Temp Gauge Adapter

Easy adapter for water temp gauge probe.  Just hose clamp into the top radiator hose. 
Please specify electrical or mechanical gauge when ordering.
$25.00


Mechanical Shown in Picture
 

EXHAUST:

HEADERS:

13B Stainless Steel Header
$350.00/ea

EXHAUST SYSTEM:

Our exhaust system was developed with many hours spent on our Dyno.  We used an expansion chamber concept. We have consistently seen a 6 to 10 HP gain over other exhaust systems.

 ITS Front Section
$225.00

 ITS Mid Pipe
$80.00

 Ultra-Flo Muffler
$138.00

Band Clamp $20.50
Muffler Clamp $4.50
Exhaust Hanger $10.50

Transmissions:

Transmission Rebuild Labor $425.00*
*Plus any hard parts*
 (Gears, Selector Hubs, and Etc.)

We also have Rebuilt Transmissions that we sell outright. Please call for price.

Racing Transmission Mount:
86 & 89-91 RX-7
(Stiffer Bushing)
$35.00

*NEW* Aluminum Brake Duct Hose Guard
Easy to install.  Bolts onto the sway bar arm.
This guard protects the brake duct hose from getting rubbed by the wheel and tire.
(Only Works with Speedway Sway Bar & Arms)

$15.00/set

Steel Braided Brake Lines
86-89 Mazda RX-7
$105.00

Brake Pads:

86-91 Front Hawk Blue Pads 149.00
86-91 Rear Hawk Blue Pads   87.00

DIFFERENTIAL:

2nd Gen Differential Mount Bushing Set
These bushings are made of Delrin to take the load off the front pinion mount.
$75.00/set

Front Pinion Mount
$99.54
 

CLUTCH:

ITS Race Pressure Plate
$165.00

 ITS Race Disc
$97.50

 ITS Dampened Race Disc
$165.00