HOME NEXT MIATA AIR DAM MIATA EXHAUST SYSTEM MIATA BRAKE, DIFF &  TRANSMISSION MIATA ENGINE, INTAKE, & COOLING

Welcome to our Miata Part Page.  With our increase in Miata parts we felt the need to separate our products to make it easier to locate the part that you are looking for.  We now have the suspension page, air dam page, exhaust system page, engine, cooling, intake page, brake, diff and transmission page.    We hope that you will take the time to view all of them.  We are very excited with all the new products that we are coming out with and as always our products are track proving before selling them.. 

 
Suspension:

MIATA SWAY BAR SET:

Miata 1-1/4" Sway Bar Kit
$475.00
 Sway Bar,  Pre Bent Arms (3 Adjustment Holes), Short End Links, Adjustable Mounting Brackets, 1-1/4" Pillow Block Set
We have 2 bars available:
.250 Wall (Approx. Rate 541#--4521#)
.188 Wall (Approx. Rate 473#--394#)

**Miata Sway Bar Adjustable Mounting Brackets**
 Allows  for up to 4 positions. Forward and back to keep sway bar end links in proper position and not binding.  5 Adjustment Holes.

Miata 5/8" Rear Sway Bar Kit
$275.00
Sway Bar, Sway Bar Arms, Mounts
 

*Sway Bar Instructions*

For those who want to use their Spec Miata Bars you can purchase our adjustable mounting brackets and Polyurethane mounts.
$175.00/Set

Polyurethane Mounts
 (Specify 15/16" or 1-1/16" Diameter)

 

Short End Links
Recommended with our Front Bar
$35.00/set

Miata Front Bilstein Shock
$116.35/ea

Miata Rear Bilstein Shock
$113.35/ea

 

 

 

"NEW" Offset Control Arm Bushings
$35.00/Per Pair (One Side)
These bushings when installed at their maximum offset will increase your camber by 1 1/2 degrees.  We install them in the front upper control arms because there is less force trying to rotate them and we gain fender clearance.  Grease fittings are included, which lock the bushings in place.   Please refer to installation instructions below.

*Offset Upper Control Arm Bushings Instructions*

Miata Modified Control Arms:

Front and rear control arms with
Delrin Bushing and Spherical Bearings.
 Ball Joints are not replaced.
$875.00/exchange only


Miata Adjustable Links
$125.00/set

Our links are like no others, we have left and right
rod ends so you don't have to undo one end to make
adjustments.  All you have to do is loosen lock nuts
and turn with you fingers.  They come with the proper
spacers for installation.


Miata Upper Mounting Plate
Raises mounting point 1 1/2"
$35.00/ea
*We will make to a custom height for $40.00/ea*

*Mounting Plate Instructions*