Shocks:

"NEW" JRZ Single Adjustable Shock
$1500.00/per set
Aluminum threaded body shock with
a nitrogen port at the bottom of shock and  the adjustment knob on the top for easy access.

"New JRZ Double Adjustable Shock
$2300.00/per set
Aluminum threaded body shock with an adjustment
 knob on the top for easy access and an
adjustment on the lower part of the shock. Also has an nitrogen port on the lower part of the shock.

 

Miata Front Bilstein Shock
$116.35/ea

Miata Rear Bilstein Shock
$113.35/ea
 

MIATA SWAY BAR SET:

*Sway Bar Instructions*

Miata 1-1/4" Sway Bar Kit
$475.00
Sway Bar,  Pre Bent Arms (3 Adjustment Holes),
Short End Links, Adjustable Mounting Brackets,
 1-1/4" Pillow Block Set

Our bars are:
.250 Wall (Approx. Rate 541#--4521#)
 

Short End Links
Recommended with our Front Bar
$35.00/set

**Miata Sway Bar Adjustable Mounting Brackets**
 Allows  for up to 4 positions. Forward and back to keep sway bar end links in proper position and not binding.  5 Adjustment Holes.



Polyurethane Mounts
 (Specify 15/16" or 1-1/16" Diameter)

Miata Sway Bar Adjustable Mounting Brackets with Polyurethane mounts $175.00/ kit*
*This kit is for people how would like to keep their Spec Miata sway bars.*
 

Miata 5/8" Rear Sway Bar Kit
$275.00
Sway Bar, Sway Bar Arms, Mounts

 

Control Arm Delrin Bushings:

Front Upper Offset Control Arm Bushings
$40.00/per arm (1side)
These bushings when installed at their maximum
 offset will increase your camber by 1 1/2 degrees. 
 We install them in the front upper control arms
because there is less force trying to rotate them
and we gain fender clearance. Grease fittings
are included, which lock the bushings in place.  
 Please refer to installation instructions below.

*Offset Upper Control Arm Bushings Instructions*

Front Upper Non-Offset Control Arm Bushings
$29.00/per arm (1side)

Rear Upper Control Arm Bushing
$38.00/per arm (1side)

Rear Lower Control Arm Outer Bushing
$32.00/per arm (1 side)
 

Complete Miata Modified Control Arm Set:



Front and rear control arms with
Delrin Bushing and Spherical Bearings.
 Ball Joints are not replaced.

Non- Offset $840.00

Offset $857.00

**We modify customer's control arms**
*Not based on  an exchange program*

**Note: We will do individual control arms if needed**

Miata Upper Mounting Plate
Raises mounting point 1 1/2"
$39.00/ea
*We will make to a custom height for $45.00/ea*


*Mounting Plate Instructions*

Miata Adjustable Links
$125.00/set
Our links are like no others, we have left and right
rod ends so you don't have to undo one end to make
adjustments.  All you have to do is loosen lock nuts
and turn with you fingers.  They come with the proper
spacers for installation.